Accredited EMC and Wireless Testing in South East Melbourne
At EMC Technologies, we carry out accredited EMC, radio, and wireless testing from our Bayswater facility in Croydon South, Melbourne. Our experienced engineers support manufacturers, product developers, and compliance teams with independent testing, technical guidance, and regulatory compliance programs for Australian and international markets.
As one of our specialist NATA-accredited laboratories in Australia, Bayswater offers dedicated EMC testing facilities, including equipment for automotive electronic components and larger products. We can also coordinate additional compliance services across our wider laboratory network, helping you plan and complete the necessary testing for your product.
Services Available at Our Bayswater Facility
From initial product development through to regulatory approvals, our Bayswater team can help identify the testing you need and arrange a suitable assessment program. Our local expertise includes EMC, radio, and wireless compliance, with access to EMC Technologies' full service offering through our Australasian laboratory locations.
EMC Testing
Emissions and immunity testing to measure electromagnetic interference and support product compliance.
Radio and Wireless Testing
RF testing for wireless technologies, including Wi-Fi, Bluetooth, cellular, and other radio-enabled devices.
Shielding Effectiveness Testing
Evaluating how effectively enclosures, barriers, and shielded spaces reduce electromagnetic interference.
EMR Testing
Electromagnetic radiation and human exposure assessments to help meet applicable safety requirements.
On-Site EMC and RF Testing
Portable testing and technical investigations for equipment requiring analysis at its installed location.
Antenna Performance Testing
Performance assessments to verify antenna design, wireless operation, and product development.
EMC Consulting Services
Practical engineering guidance for test planning, product development, troubleshooting, and compliance.
Inside Our NATA-Accredited Laboratory in South East Melbourne
Our Bayswater facility provides specialised laboratory environments for reliable, repeatable EMC testing in Australia, supporting manufacturers working towards local and international compliance. With an allocated automotive EMC chamber and a 3-metre indoor test site, we can accommodate a variety of electronic components, equipment, and larger products.
3m Indoor Open Area Test Site (iOATS)
EMC Technologies’ 3-metre iOATS in the south-east suburbs enables accurate electromagnetic emissions testing in an indoor environment, protected from external radio frequency (RF) interference that can affect outdoor measurements.
Designed to accommodate a wide range of product types, including larger equipment and vehicles, the facility provides a practical testing environment for manufacturers working towards Australian and international EMC compliance.
Key Features of Our 3m iOATS
- 3-metre indoor test site compliant with CISPR 16-1-4 and ANSI C63.4:2014
- Controlled environment free from interfering external RF signals
- Large 3.5m × 3.5m entry door for vehicles and larger products
- Filtered single-phase and three-phase mains power
- Separate annex chamber for supporting and ancillary equipment
- Comfortable, air-conditioned control room
Testing Standards and Accreditation for Our 3m iOATS
- Commercial EMC standards: CISPR 11, CISPR 12, CISPR 13, CISPR 14-1, CISPR 15, CISPR 16, CISPR 22 and CISPR 32.
- NATA-accredited testing: CISPR 11, CISPR 12, CISPR 13, CISPR 14-1, CISPR 15, CISPR 22, CISPR 32, FCC Part 15, and applicable ISED requirements.
- Automotive EMC testing: CISPR 25 / EN 55025:2017.
- North American requirements: FCC Part 15 and applicable ANSI C63.4/C63.5 requirements, along with FCC (USA) and ISED (Canada) registration and accreditation.
Indoor Test Chamber – CISPR 25 Semi-Anechoic
EMC Technologies’ semi-anechoic chamber presents a controlled environment for automotive EMC testing, particularly for electronic sub-assemblies.
It supports assessments against CISPR 25 / EN 55025 requirements, helping manufacturers evaluate electromagnetic emissions from vehicle electronics and components.
Key Features of Our Semi-Anechoic Test Chamber
- NATA-accredited testing to CISPR 25 / EN 55025
- Suitable for automotive electronic sub-assemblies
- Large 2.5m × 2.5m entry door for larger equipment access
- Spacious and comfortable air-conditioned control room
How an EMC Technologies Bayswater Project Progresses
We work closely with manufacturers, engineers, and compliance teams to understand each project's needs, set out clear testing specifications, and agree on the best way forward.
1. Discuss Your Requirements
Tell us about your product, its intended markets, technologies, and compliance obligations so we can establish the testing scope.
2. Confirm the Test Plan and Quote
We’ll review the applicable standards, testing arrangements, and anticipated timescales, then produce a quote for the agreed plan.
3. Complete Testing and Reporting
Our experienced engineers carry out the planned test program and document the results in accordance with the confirmed conditions.
4. Review Results and Next Steps
We’ll discuss the findings and advise on any further testing, engineering support, or regulatory approval requirements as needed.
Our NATA-Accredited Laboratories in Australia and New Zealand
EMC Technologies operates four main laboratory locations throughout Australasia, offering manufacturers convenient access to professional testing capabilities and expert engineering teams wherever they’re based.
- Auckland, New Zealand
- Sydney, Australia
- Melbourne, Australia
- South East Melbourne (Bayswater), Australia
Many of our facilities provide overlapping services, but if your project requires testing at more than one location, we can coordinate your test plan across our wider network, giving you a single trusted provider to support your compliance program.
EMC Technologies Bayswater Office
Unit 18, 88 Merrindale Drive,
Croydon South,
Victoria 3136,
Australia
Monday to Friday
9am to 5pm
Schedule EMC Testing in Australia – Bayswater Labs
Talk to us about your product and the testing you need. Our team is on hand to help establish the appropriate scope, confirm available facilities, and discuss your project requirements.
Request a Quote
FAQs About EMC Testing in Bayswater, Australia
What standards can EMC Technologies test at its Bayswater laboratory?
Our Bayswater laboratory supports accredited EMC, wireless radio, military and automotive testing against a range of Australian and international requirements. These include commercial EMC standards such as CISPR 11, CISPR 15 and CISPR 32, IEC 60601-1-2, MIL-STD 461 along with CISPR 25 for automotive electronic components and applicable FCC and ISED requirements. Looking for EMC testing in Australia? Get in touch with our team today.
Can large products or vehicles be tested at the Bayswater facility?
Yes. Our Bayswater facility has a 3-metre indoor Open Area Test Site (iOATS) with a 3.5m × 3.5m entry door designed to accommodate larger products and vehicles. We also have a dedicated CISPR 25 semi-anechoic chamber for automotive electronic sub-assemblies. Contact our team with your product's dimensions and testing requirements, and we'll confirm the most suitable test program.
Is EMC Technologies Bayswater a NATA-accredited laboratory in Australia?
Yes. EMC Technologies Bayswater is accredited by the National Association of Testing Authorities (NATA) for specified testing activities. NATA accreditation demonstrates that the laboratory has been independently assessed against ISO/IEC 17025 requirements for technical competence and reliable testing. Looking for accredited EMC testing in Australia? Get in touch with our team today.